Spa Filter & Cartridge Cleaner
Maintenance and cleaning is essential to maintain a healthy filtration system in a spa. Part of this maintenance is the cleaning of sand or cartridges within the filter.
Direction for use:
· Backwash the filter, drain & isolate then replace the drain before proceeding.
Add at a rate as follows:
18” filter 250ml 30” filter 750ml
24” filter 500ml 36” filter 1000ml
Fill the chamber with water and allow to soak overnight. Rinse thoroughly for at least 2 minutes before returning the filter to use
Remove cartridge and other screens from the unit and flush soiling from the filter body cartridge and screens. Soak both the cartridge and screens overnight in a 5% solution of filter & cartridge cleaner (5ml per 100ml of water) Rinse thoroughly, allow to dry and then use a soft brush to agitate. Reassemble the filter unit.
Health & Safety
Never mix with any other chemicals including cleaning products, bleaches, weedkillers or chlorine based products, or a dangerous reaction may occur
Handle products in a well vented area, outdoors if possible – always adding chemicals to water & not water to chemicals.
Always wash hand thoroughly after using any spa chemicals
Store in a cool dry place, above 5 degrees C, do not allow to freeze
Dosage instructions are given as a guide for the most effective product use
KEEP OUT OF REACH OF CHILDREN